HD Series

Filter made out of imported non woven media of 150g supported by 1 layer of coarse woven mesh on air entry side and 1 layer of heavy duty aluminium expanded mesh on air exit side, finally housed in a galvanized / Aluminum frame, flange or box type. All four sides are potted with a special PU resin with sponge effect. 100% media is machine pleated to face the max air flow turbulence during operations.

SF Series

Filter made out of imported non woven compressed felt of 250 grams supported by 1 layer of fine woven mesh on air entry side and 1 layer of heavy duty aluminium mesh on air exit side, finally housed in a galvanized / Aluminum frame, flange or box type. All four sides are potted with a special PU resin with sponge effect. 100% media is machine pleated to face the max air flow turbulence during operations.

PE-600 G (Full Impreganated)- OEM

PE-600G is our Hi-End range of diffusion ceiling filter media exclusively designed for Hi-End OEM's. This is a high quality diffusion filter media, made from 100% branded polyester fiber and progressively structured with reinforced high quality PE net backing & 100% glued. Specially designed to increase air quality levels above and beyond spray booth manufacturer's recommendation. Removing contamination and providing consistent air flow across the painting surface, eliminating re-do's.

ZFb Series- Welded

The ZFb series are rigid welded pocket filters consists of a series of synthetic media pocket built up in non woven layers to ensure mechanical filter cake build up & eliminate fiber shedding. The filter media is thermally bonded synthetic micro fibers that are extremely durable and totally resistant to damage caused by turbulent air or mishandling. Made from 100% branded polyester. Pockets are aerodynamically designed for full media utilization.

ZFc Series- Stitched

The ZFc series of pockets comes with a stitched / in-house welding technology and is a low cost pocket filter for less challenging Usage Zone. The filter incorporates high performance synthetic filter media featuring progressive density and high dust holding capacity. Apart from lower cost the ZFc series of pockets can be delivered in customized sizes and meets the clean ability requirement of many HVAC customers.

MB Series-Meltblown

The pockets are manufactured from 100% polypropylene fibers laid on a colored polypropylene carrier material. The unique weld pattern design ensures that pockets inflate easily without touching adjacent pockets giving evenly distributed air flow & high dust holding capacity. Pockets are ready for assembly into bag filters with no cutting or stitching required.

GFM-200

The GFM-200 is a filter media composed of finest glass fibers. Thanks to its progressive structure, which means that the density of the fiber is increasing towards the clean air side, the depth effect and the high dust holding capacity are guaranteed. For the special application, systems with an extremely high temperature, a particular bonding agent is applied.

HT-300

Our HT-300 high temperature oven filters uses glass fiber media bonded together into a uniform high efficiency mat. The media pack is encased in a metallic housing for high temperature applications. The filter layer of this special media on the air exit side ensures that fibers do not migrate into the air stream. The clean air side is identify by a mark on the filter frame. Our HT-300 is an ideal choice in drying oven for automotive industry.

LHT-300

Our high temp oven filters, LHT-300 series uses a special glass fiber media supported by a high temp glass fiber cloth & wire mesh on both sides. The pleated media pack is encased in a fine galvanized metal housing for high temperature applications.

PA22 (50 mm)

Mono filament glass fiber mat with progressive structure and laminate backing on air leaving side, making the product rigid and stable. High paint holding capacity with minimum airflow resistance. PA-22 paint arrestors are a prudent choice when cost is paramount.

PA30 (90 mm)

Mono filament glass fiber mat with progressive structure and laminate backing on air leaving side, making the product rigid and stable. High paint holding capacity with minimum airflow resistance. PA-22 paint arrestors are a prudent choice when cost is paramount.

PA30-F

The PA30-F series of paint over spray collection filters protects equipment's and environment from paint contamination. Mono filament glass fiber-mat with progressive structure and laminate backing on air leaving side, making the product rigid and stable. High paint holding capacity with minimum airflow resistance. PA (F) series of paint arrestors comes with a re-usable galvanized frame.

AF111-Std. Brown (Andreae Original)

Made with 2 layers of heavy kraft paper (50% Virgin Fiber & 50% Recycled of 240g) punched, pleated & glued together with 2 built in extension limiters. The limiters are here to prevent over-extension of the filter, its the small blue of pink stripe rope inside the filter, over-stretching the filter dramatically increases the static pressure & reduces filter life. Thanks to the limiters, the maximum load capacity is guaranteed. AF111 Std. Brown The Original is filter for all paint types.

AF113-Std. White (Andreae Original)

Made with 2 layers of heavy kraft paper (50% Virgin Fiber & 50% Recycled of 240g) punched, pleated & glued together with 2 built in extension limiters. The limiters are here to prevent over-extension of the filter, its the small blue of pink stripe rope inside the filter, over-stretching the filter dramatically increases the static pressure & reduces filter life. Thanks to the limiters, the maximum load capacity is guaranteed. AF113 Std. White The Original is filter for all paint types.

AF121-With Polyester (Andreae Original)

Made with 2 layers of heavy kraft paper (50% Virgin Fiber & 50% Recycled of 240g) punched, pleated & glued together completed with a polyester layer on its back increasing its filtration efficiency with 2 built in extension limiters. The limiters are here to prevent over-extension of the filter, its the small blue of pink stripe rope inside the filter, overstretching the filter dramatically increases the static pressure & reduces filter life. Thanks to the limiters, the maximum load capacity is guaranteed. HE High Efficiency (With Polyester) The Original is filter for all paint types.

AF123-With Polyester (Andreae Original)

Made with 2 layers of heavy kraft paper (50% Virgin Fiber & 50% Recycled of 240g) punched, pleated & glued together completed with a polyester layer on its back increasing its filtration efficiency with 2 built in extension limiters. The limiters are here to prevent over-extension of the filter, its the small blue of pink stripe rope inside the filter, overstretching the filter dramatically increases the static pressure & reduces filter life. Thanks to the limiters, the maximum load capacity is guaranteed. HE High Efficiency (With Polyester) The Original is filter for all paint types.

CKP 6.0-Columbus Orignal

Our over spray collectors CKP 6.0 (6 Layers) are fabricated from slit and expanded kraft media, and utilize the baffle principle of collection to its highest level. These layers are arranged to redirect and cause the particulate-laden airflow to become turbulent, resulting in maximum contact between the solid over spray-particulates and the baffles within the collectors. These baffled layers are also positioned in a graduated density pattern to assure full usage of the collectors' media, or depth loading - the uniform depositing of particulates throughout each layer of the media. This range of media is been imported from USA.

CKP 8.0-With Polyester (Columbus Original)

Our over spray collectors CKP 8.0 (With Polyester) are fabricated from slit and expanded kraft media supported by a layer of polyester media which utilize the baffle principle of collection to its highest level. These layers are arranged to redirect and cause the particulate-laden airflow to become turbulent, resulting in maximum contact between the solid over spray-particulates and the baffles within the collectors. These baffled layers are also positioned in a graduated density pattern to assure full usage of the collectors' media, or depth loading - the uniform depositing of particulates throughout each layer of the media. This range of media are been imported from USA.

Paint Box uCube (Andreae Original)

uCube was developed by the Andreae team, using the technology of inertial separation. From the beginning of the development, we wanted to use the best of the existing and recyclable raw materials, namely cardboard and polyester. The mix of these materials gave the best load capacity and filtration, after two years of development and a hundred test, the universal cube was born in early 2019. All this research and these many reflections make uCube an easy product to assemble, which allows the reduction of the costs and the optimization of the transport. This uCube is designed with a 3 stage filtration technology such as : Loader, Catcher and Perfector which allows a charge capacity of over 30 kg of paint deposit which is by far in comparison to any other make of paint box in the industry.

Paint Box Supra PC Pleat (Columbus Original)

Do you need a high-performance, turn-key solution that lowers your operating costs and carbon footprint? With superior holding capacity, high efficiency, and extremely low pressure drop, Columbus Industries? PC PLEAT takes paint overspray collection to higher levels. With a holding capacity of up to 50 pounds before reaching 1 w.g. of static pressure, PC PLEAT?s extended filter life provides more flexibility in booth maintenance scheduling: you spend more time painting and less time changing filters. Don?t let paint overspray particles contaminate your air recirculating system. PC PLEAT works at both high and low airflows across different paint mixes, chemistries, and atomizations. These versatile filters provide an efficiency of up to 99.9% PC PLEAT incurs roughly 1/10 of the initial static pressure of a baffle-style box. At an air speed of 1 m/s and average operating pressure drop as low as 65 Pa, a PC Pleat solution means less KW consumption.

Cell Pocket

Cell Pockets are the most effective and most economical way to manage the over-spray produced by common coatings including medium and high solids paints, powder coatings, water reduced paints, stains and adhesives. Cell Pockets are the best performing, single stage over-spray arrestor, bar none. Cell Pockets removes far more particles from the booth exhaust than any other high performance single stage over-spray arrestor. Its unique pockets enable Cell Pockets to accumulate large amount quantities of over-spray before it begins to noticeable restrict booth airflow.

NF-560 GX (Surface Impreganated)

NF-560 GX is our standard range of diffusion ceiling filter media exclusively designed for after market. This is a diffusion filter media, made from 100% branded polyester fiber and progressively structured with reinforced high quality woven cloth backing and surface glued. Specially designed to increase air quality levels above and beyond spray booth manufacturer's recommendation. Removing contamination and providing consistent air flow across the painting surface, eliminating re-do's.

NF-600 GX (Surface Impreganated)

NF-600 GX is our low cost range of diffusion ceiling filter media exclusively designed for after market refinishing booths. This is a high quality diffusion filter media, made from 100% branded polyester fiber and progressively structured with reinforced high quality woven cloth backing with partially glued. Specially designed to increase air quality levels above and beyond spray booth manufacturer's recommendation. Removing contamination and providing consistent air flow across the painting surface, eliminating re-do's.

NF-600 NB (Full Impreganated)

NF-600 NB is our standard range of diffusion ceiling filter media exclusively designed for after market refinishing booths. This is a high quality diffusion filter media, made from 100% branded polyester fiber and progressively structured with reinforced high quality fiber-glass net backing & 100% glued. Specially designed to increase air quality levels above and beyond spray booth manufacturer's recommendation. Removing contamination and providing consistent air flow across the painting surface, eliminating re-do's.

Metallic Wire Mesh Filters

We are offering a range of Wire Mesh Filters, which is widely known for its high quality and authentic made. The range is available in a varied of metals like Galvanized, Aluminum & Stainless Steel. Our range of Stainless Steel Wire Mesh Filters are used in a variety of Usage Zone. We offer customized designs of the range that are in different sizes in single or multiple layers. Furthermore, the available weaving methods are twill, plain, or plain Dutch and twill Dutch.