HD Series

Filter made out of imported non woven media of 150g supported by 1 layer of coarse woven mesh on air entry side and 1 layer of heavy duty aluminium expanded mesh on air exit side, finally housed in a galvanized / Aluminum frame, flange or box type. All four sides are potted with a special PU resin with sponge effect. 100% media is machine pleated to face the max air flow turbulence during operations.

CB-25

The filter radial wedge pleat ensures that the greatest media area is exposed to the air flow to promote uniform dust loading. An incremental structure of frame retardant synthetic fiber filter media, confirming to European DIN53438 is glued with fine Aluminum mesh to give maximum grid throughout. Finally housed in a water proofing cardboard frame.

Pre V2

Heavy duty industrial grade synthetic media encased in Galvanized steel frame and reinforced by aluminum expanded metal on air exit side a W shaped rod on air entry side for easy media change over. Also available with a rod type construction frame.

SF Series

Filter made out of imported non woven compressed felt of 250 grams supported by 1 layer of fine woven mesh on air entry side and 1 layer of heavy duty aluminium mesh on air exit side, finally housed in a galvanized / Aluminum frame, flange or box type. All four sides are potted with a special PU resin with sponge effect. 100% media is machine pleated to face the max air flow turbulence during operations.

ZFb Series- Welded

The ZFb series are rigid welded pocket filters consists of a series of synthetic media pocket built up in non woven layers to ensure mechanical filter cake build up & eliminate fiber shedding. The filter media is thermally bonded synthetic micro fibers that are extremely durable and totally resistant to damage caused by turbulent air or mishandling. Made from 100% branded polyester. Pockets are aerodynamically designed for full media utilization.

ZFc Series- Stitched

The ZFc series of pockets comes with a stitched / in-house welding technology and is a low cost pocket filter for less challenging Usage Zone. The filter incorporates high performance synthetic filter media featuring progressive density and high dust holding capacity. Apart from lower cost the ZFc series of pockets can be delivered in customized sizes and meets the clean ability requirement of many HVAC customers.

MB Series-Meltblown

The pockets are manufactured from 100% polypropylene fibers laid on a colored polypropylene carrier material. The unique weld pattern design ensures that pockets inflate easily without touching adjacent pockets giving evenly distributed air flow & high dust holding capacity. Pockets are ready for assembly into bag filters with no cutting or stitching required.

GFM-200

The GFM-200 is a filter media composed of finest glass fibers. Thanks to its progressive structure, which means that the density of the fiber is increasing towards the clean air side, the depth effect and the high dust holding capacity are guaranteed. For the special application, systems with an extremely high temperature, a particular bonding agent is applied.

HT-300

Our HT-300 high temperature oven filters uses glass fiber media bonded together into a uniform high efficiency mat. The media pack is encased in a metallic housing for high temperature applications. The filter layer of this special media on the air exit side ensures that fibers do not migrate into the air stream. The clean air side is identify by a mark on the filter frame. Our HT-300 is an ideal choice in drying oven for automotive industry.

LHT-300

Our high temp oven filters, LHT-300 series uses a special glass fiber media supported by a high temp glass fiber cloth & wire mesh on both sides. The pleated media pack is encased in a fine galvanized metal housing for high temperature applications.

PA30-F

The PA30-F series of paint over spray collection filters protects equipment's and environment from paint contamination. Mono filament glass fiber-mat with progressive structure and laminate backing on air leaving side, making the product rigid and stable. High paint holding capacity with minimum airflow resistance. PA (F) series of paint arrestors comes with a re-usable galvanized frame.

Deep Pleat HEPA

Our HEPA (High Efficiency Particulate Air) filter is constructed from high quality wet laid micro-glass media and uses corrugated aluminium separators. The pleat pitch is designed for minimum air flow resistance and the spacer edge`s are 'safety rolled' to prevent media puncture. The filter is sealed to the frame with a two - part spongy PU resin to ensure zero leakage and zero transit damage.</span>

Mini Pleat HEPA

<span style="font-weight: 400;">Our 'hot - melt mini - pleat' filter design configuration increases its energy efficiency due to lower pressure drop in comparison to conventional deep pleat HEPA. The 'AFi's Mini-Pleat' HEPA filters are thus the lowest-cost filters to operate over the filter's life. In new Usage Zone, using 'AFi Mini-pleat' HEPA filters can reduce the cost and size of the filter housing. AFi's mini-pleat HEPA filters offer outstanding performance and are factory scanned before they reach the customer. Individual testing under rigid quality control and modern assembly methods ensures conformance to specifications.</span>

Bag in-Bag out (BIBO System)

The AFi's Bag In Bag Out side loading isolation housing is designed to ensure that the service personnel are protected from coming in direct contact with the unsafe impurities during filter change. Designed to withstand +500 mm wc. Each HEPA filter cell is sealed against the housing frame and furnished with an individual door. A set of repression bags is shipped for use with each door. Once the initial filters are installed and the first bag attached, all filters, both dirty and new, are handled through the bag.

Metallic Wire Mesh Filters

We are offering a range of Wire Mesh Filters, which is widely known for its high quality and authentic made. The range is available in a varied of metals like Galvanized, Aluminum & Stainless Steel. Our range of Stainless Steel Wire Mesh Filters are used in a variety of Usage Zone. We offer customized designs of the range that are in different sizes in single or multiple layers. Furthermore, the available weaving methods are twill, plain, or plain Dutch and twill Dutch.

Universal Holding Frame

AFi's UHF-100 Universal Filter Holding Frames are designed for simple and cost-effective construction / remodeling of filter banks. Its unique modular design is ideal for speedy and trouble free installation at site. The frames come in a variety of standard sizes and can also be delivered in custom made sizes. The frames come with 4 quick clamp spring clips to ensure positive seal. The holding frames are available in Extruded Aluminum, Galvanized and Stainless Steel construction. A silicone free gasket is provided with the holding frame.

Fan Filter Module

AFi manufactures state-of-the art fan filter modules incorporating a choice of mini - pleat HEPA filters or conventional deep pleat HEPA filters. Options of top mounted radial fan, or side mounted centrifugal fan are also available in the standard range. Pre filters incorporate UL certified media, to ensure extremely high module service life. Blowers are completely maintenance-free, low noise type. Modules with removable and replaceable HEPA filters are also available in the standard range.

OT Plenum

AFi offers a wide range of clean air filtration modules for wall mounting (pressurizing type) or for ceiling mounting (recirculating type), including specific modules configured for operation theater duty, and with option of built in DX type air conditioning , ultraviolet bactericidal, and positive control of temperature, humidity & airborne particle unit. OT modules are specialized filtration modules incorporating additional features of bactericidal effect, as well as special provisions for surgical and general lighting, conducting for anesthetic gasses, electrical cabling, & other customized features which are essential in a modern operation theater. These modules create a sterile environment in the 'critical' zone, & achieve zero bacteria colony counts in the wound vicinity. They are therefore extremely helpful in alliminating post-operative complications which arise due to infection.</span>